| BRUNO |
Scooter / Power Chair Lifts |

ASL-210 |
Just turn the key and move the control lever to the
position marked arrow up or arrow down. The unit automatically lifts
and lowers the scooter, as well as raising and lowering the hold-tite
lock-down mechanism. The Out-Sider III can raise and store 3 or 4
wheel scooters weighing up to 300 lbs., using a Class III hitch with a
2" receiver. A special weight sensing device applies exactly
the right amount of pressure to the hold-tite device to secure the
scooter.
|

VSL-670
|
Electronically powered from the vehicles battery, simply
press a button on the hand-held controller and the Curb-Sider Super XL
raises and lowers. Providing up to 180' of powered rotation makes it
easy to raise, lower and rotate a fully or partially assembled scooter or
power chair on the curb at the side of your vehicle or directly behind it. |

VSL-600 |
The Curb-Sider was designed to fit most types of vans,
minivans, sport utility vehicles and pickups with caps. Plus, it can
be adapted for use with some types of power wheelchairs, increasing its versatility.
Providing up to 180' of powered rotation makes it easy to raise, lower and
rotate a fully or partially assembled scooter or power chair on the curb
at the side of your vehicle or directly behind it.
|

ASL-400
|
Bruno's Scooter-Lift
Jr. can be adapted to operate in station wagons and hatchbacks. This
versatility can provide a significant benefit when a new vehicle purchase
is not in your budget. The
Scooter-Lift Jr. is also available with the added option of a
spring-assist feature. This further reduces the effort needed to raise and
lower the lift arm before and after use. |

VSL-550/560 |
The Scooter-Lift Sr.
is electrically powered from the vehicle's battery. Simply press a button
on the controller and the Scooter-Lift Sr. raises and lowers your scooter,
allowing you to manually swing it in or out of the vehicle. The
Bruno Scooter-Lift Sr. makes taking your scooter with you simple and easy.
No need to remove and store the seat, and our custom manufactured C-Arm
and T-Bar Docking Device allow you to raise you scooter at the touch of a
button.
|

VSL-900C |
The Scooter-Lift II can raise and store a fully assembled scooter or wheelchair through the
driver's or passenger's side sliding door of minivans, and passenger side
doors of full size vans. The Scooter-Lift II requires very little
arm strength, balance or effort to use. It is so compact that even in a
minivan, there is still enough room for three passengers to sit
comfortably in the rear seat. With scooter removed, or when traveling
without the scooter, entry and exit is easy since the door opening remains
unobstructed.
|

AWL-100/150 |
The
Wheelchair-Lifter raises and tilts your wheelchair horizontally, all at
the touch of a button. You don't need to struggle any longer to get your
wheelchair in and out of the trunk of your car. Bruno's Wheelchair-Lifter
can also be adapted as the Model AWL-150 to raise your wheelchair
vertically for storage in a full size van or minivan. The
Wheelchair-Lifter is an electrically operated lift that draws its power
from the vehicle's battery. Raising and lowering the wheelchair is as easy
as touching a button.
|

PUL-1700 |
This easy to use wheelchair lift is electronically
powered. All you need to do is roll the chair next to the vehicle,
transfer and then use the hand held controller to do the rest.
Unloading the chair is just as simple and trouble free. The
Cab-Sider is available for any full size or compact truck that features an
extended cab with a third door. |

PUL-1100 |
The Out-Rider gives you the freedom to drive a pickup,
even if you use a wheelchair or scooter. The unique design allows
you to lift and store your wheelchair in the bed of your full size,
mid-size, or extended cab pickup while sitting in the cab of the
truck. With minor adaptations, the Out-Rider can easily lift a
scooter, rigid or power wheelchair under 200 lbs. A more powerful
Heavy-Duty Lift Arm is available as an option.
|